• CAK-1 Solid Tantalum Capacitors CSR13

CAK-1 Solid Tantalum Capacitors CSR13

  • Séries: CAK-1
  • Tension de travail Gamme: 6.3V - 100V DC
  • Gamme de capacité: 0.0047μF~470μF
  • Température de fonctionnement: -55°C to +125°C
  • Charger la vie: --
  • Application: DC or pulsating circuits of military electronic equipment with reliability requirements in the fields of aerospace, aerospace, aviation, weapons, electronics, ships,and communications.

  

Manuel Télécharger Produit (fichier PDF) Envoyer un e-mail à nous!

■ Introduction du produit

CAK Wet Tantalum Capacitors, Military Established Reliability,MIL-PRF-39003/01 Qualified Styles CSR31, replacement of K53-1, K53-1A, K52-18.

FEATURES
1) Hermetically sealed
2) Metal cased
3) Axial lead
4) Tubular

Technical:
1) Operating Temperature: -55°C to +125°C (to +85°C with voltage derating)
2) Capacitance Tolerance: at 120 Hz, +25°C ± 20 % standard. ± 10 %, ± 5 % available as special.
3) Voltage Rating: 6.3 VDC to 100 VDC
 
■ Specification

Rated Voltage (UR) V 6 10 15 20 35 50 75 100
Derating Voltage(Uc)   V 4 7 10 13 23 33 50 67
Dimension (mm) Max Weight
g
Capacitance   µF
Case D L d
A 3.2 6.5 0 5 0.7 5.6
6.8
3.9
4.7
2. 7
3.3
1.2
1.5
1.8
2.2
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0. 39
0.47
0. 56
0.68
0.82
1
0. 047
0.056
0. 068
0 082
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1. 0
0.1
0.12
0.15
0 18
0.22
0.27
0. 33
0.39
0 47
0 56
0.68
0.047
0.056
0.068
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
B 4.5 11 0.5 2.3 47
56
27
33
39
18
22
8.2
10
12
15
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
0 82
1
1.2
1.5
1. 8
2.2
2. 7
3.3
3.9
0.68
0.82
1
1.2
1 5
1.8
2. 2
2.7
C 7 16.5 0. 65 6. 5 150
180
82
100
120
56
68
27
33
29
47
8.2
10
12
15
18
22
5.6
6.8
8.2
10
12
15
18
4.7
5.6
6 8
8.2
10
3.3
3.9
4.7
D 8.6 19 0.65 11.0 270
330
390
470
150 150
180
220
270
330
56
68
82
100
120
27
33
39
47
56
68
22 12
15
 

Solid-Electrolyte TANTALEX capacitors to military specification MIL-PRF-39003 - Exponential and Weibull Distribution: hermetically sealed, metal cased, axial leaded tubular capacitors manufactured as military style CSR13. These capacitors are furnished to the requirements of the military specification, including marking, testing and inspection.

In accordance with the specification, all capacitors are marked with the military part number (M39003/xx-xxxx) rather than the older style designation (CSRxxxxxxxx) and should be ordered as such. All capacitors covered by MIL-PRF-39003 are now ordered with the military part number as illustrated in the Part Numbering System chart. Capacitors must not be ordered using the style number identification.

MIL-PRF-39003 establishes failure rates (expressed in percent per 1000 h) based on exponential and Weibull distribution. Care must be exercised in ordering to insure the part number correctly identifies the desired failure rate level.

In addition, each order for military style CSR13, CSR21, CSR23 capacitors requiring government inspection must state whether inspection is to be at the destination or at the plant. Orders requiring source inspection cannot be shipped until this has been accomplished. Style CS13 capacitors previously shown in MIL-C-26655 are directly replaced by style CSR13 and style CSR23 capacitors are extended capacitance range versions of military style CSR13.





■ How To Order
Send us the  P/N.

Cliquez pour rechercher des produits

retour d'information

E-mail
contact
tel
Nom de la compagnie
adresse

сontent